How to clean and maintain cbd oil extraction machine?

The cleaning and maintenance of cbd oil extraction machine plays a crucial role, which not only affects the working efficiency of cbd oil extraction machine, but also affects the service life of cbd oil extraction machine.  This article mainly introduces how to clean and maintain cbd oil extraction machine.

The following knowledge points are listed below:

• The correct use of cbd oil extraction machine is essential for maintenance

• Daily maintenance and cleaning of cbd oil extraction machine

 

The correct use of cbd oil extraction machine is essential for maintenance.

(1) Before using cbd oil extraction machine, the operator of cbd oil extraction machine must read the operation instruction carefully and be familiar with the performance characteristics and operation method of cbd oil extraction machine.

(2) Before the cbd oil extraction machine is opened, a comprehensive inspection of the cbd oil extraction machine must be carried out.  All fasteners shall not become loose, the handle shall rotate flexibly, and the pulley shall be turned by hand.  All operating parts shall be normal without abnormal noise.

(3) Loosen the lock nut, turn the adjusting screw counterclockwise, (the regulating handle counterclockwise rotation, narrow the gap in cake, the regulating handle clockwise, the widening gap in cake) make squeezer cone to close the circle of cone in cake, then turn the adjusting screw clockwise (spin out 3-5 rings), tighten nut again, ready to boot operation cbd oil extraction machine.

(4) The spindle shall be rotated counterclockwise.  Under no circumstances shall the cbd oil extraction machine be reversed, otherwise the major large parts of the cbd oil extraction machine will be damaged.

(5) Adjust the required extraction temperature from 120 ° c to 180 ° c (depending on the oil), turn the heating switch on the heating position, heat up the cbd oil extraction machine, control and maintain the temperature when the machine temperature rises to the set temperature, and heat up the main machine when the temperature is low in winter.

(6) Press the main motor button of cbd oil extraction machine, and the host will start to operate.  The rotation direction shall be counterclockwise.

(7) After the installation of the new cbd oil extraction machine, grinding and pressing will be carried out for 4-8 hours.  The method is to feed the cake material which has been pressed dry into the hopper slowly and repeatedly to make the chamber polished.  Please remember not to pour the material directly into the hopper at the beginning of grinding and pressing. If the feeding is too heavy, abnormal noise occurs in the chamber of the press or the screw shaft gets stuck, stop immediately to eliminate the obstruction, or start the grinding after the assembly is finished.  Forced trailer is strictly prohibited.

(8) When the cbd oil extraction machine is in normal operation, the feeding must be kept even, and it should not be too much or too little, or the cutting of the material is idling. At this moment, the cbd oil extraction machine load is normal, the operation is stable and the sound is rhythmic.  When the continuous working time is long and the machine temperature is too high, the cooling measures such as electric fan and blower should be adopted.

(9) Downtime. Before the cbd oil extraction machine is shut down, stop feeding first, and then put in a small amount of cake crumbs.  The machine can be shut down only when the remaining material in the pressing chamber is exhausted and the cake outlet no longer produces the cake. After stopping the machine, the adjusting screw will rotate clockwise for 1 to 3 turns, and then disconnect the cbd oil extraction machine power supply.

 

Daily maintenance and cleaning of cbd oil extraction machine

In addition to feeding, cbd oil extraction machine does not need to go through other operations.  The brake temperature control operation is relatively simple, covers a relatively small area and has a relatively high oil yield.  The actual oil yield can be increased by 10-30% through temperature control. In order to ensure the normal use of cbd oil extraction machine, it is necessary to regularly maintain it and take specific maintenance measures.

(1) After 12 hours of continuous operation of cbd oil extraction machine, the lubrication condition shall be checked.  At the same time, the oil cup on the reduction box shall not be short of oil, and the screw bearing shall be adjusted to be filled with butter once a week.

(2) The part of cbd oil extraction machine that needs to be lubricated should be protected from dust and other impurities.  The oil quality of the gearbox should be checked every year.

(3) When the crushing amount of cbd oil extraction machine is reduced, or the cake and oil output are abnormal, the screw shaft should be checked, the wear of the screw and the cake ring should also be checked, and the worn parts should be replaced in time.

(4) After each operation of cbd oil extraction machine, the residual cake inside the machine shall be cleaned, and the dust and dirt on the surface of cbd oil extraction machine shall be cleaned.

(5) Maintenance of cbd oil extraction machine: cbd oil extraction machine after 50 hours per work should check the lubrication condition, reducer oil cup above shall not be short of oil, squeezer shaft adjustment screw bearings should be adjusted screw hole in each class loaded with butter, dry grinding is forbidden. cbd oil extraction machine lubrication parts should prevent dust and other impurities from invading, reducer motor oil quality shall be checked once a year, found that bad, all the oil should be changed. When cbd oil extraction machine crushing amount is reduced, the bread or the oil is not normal, should check squeezer shaft, check squeezer, pressing bar, wear and tear on the circle in cake, wearing parts to change in time. cbd oil extraction machine per shift after the work, should remove cbd oil extraction machine within the residual cake, the surface dust, oil dirties clean machine. When the cbd oil extraction machine is stored for a long time, it shall be maintained once, and the screw, strip and cake ring shall be removed, washed and reoiled, and placed in a dry place.

Hope you understand the cbd oil extraction machine in this paper with the help of the oil extraction cleaning and maintenance , if you need to cbd oil extraction machine those, please contact us, to provide professional products and services.