Views: 0 Author: Site Editor Publish Time: 2021-02-02 Origin: Site
The reason why CBD oil is popular is that it has the functions of protecting nerves, improving skin inflammation, anti-oxidation, treating eczema and improving skin self-repair. Cbd oil extraction machine can extract oil from hemp seeds, leaves and stems with high efficiency and simple operation. This article mainly introduces how to operate on the cbd oil extraction machine.
The following knowledge points are listed below:
How to operate cbd oil extraction machine
Operation procedure of cbd oil extraction machine
As a kind of oil extraction machine, cbd oil extraction machine can produce high quality vegetable oil with high oil yield and good oil quality, which is deeply loved by customers. Cbd oil extraction machine is reliable in quality and stable in operation. In order to help users to make a reasonable and correct cbd oil extraction machine, this article will explain the operation process of cbd oil extraction machine.
(1) Cbd oil extraction machine opens the feed valve, loads the pre-treated raw material into the extraction tank, closes the feed valve, and starts the vacuum pump to clean the air in the extraction irrigation.
(2) Cbd oil extraction machine uses a solvent pump to inject the subcritical fluid into the extraction tank to soak the raw materials and start the extraction with stirring.
(3) The mixed oil is extracted from the extraction tank by solvent pump and pumped into the evaporation tank;
(4) Open the air outlet valve of the cbd oil extraction machine compressor, start the compressor, connect the suction port of the extraction tank and the compressor, and gasify the residual solvent in the meal. The solvent gas enters the compressor, and then flows back to the solvent circulation tank after condensing and liquefaction by the condenser for recycling. The meal was drained out of the extraction tank
(5) The cbd oil extraction machine connects the suction port of the evaporation tank and the compressor, and indirectly heats the evaporation tank to separate the solvent from the crude oil after evaporation. The solvent vapor is compressed, condensed and liquefied by the compressor and then returned to the solvent tank for recycling.
(6) This is the end of the specific operation process of cbd oil extraction machine. We hope that you can reduce the failure rate of cbd oil extraction machine through the rational application of cbd oil extraction machine, and achieve a good oil extraction effect through the rational application of cbd oil extraction machine.
(1) The extraction process of cbd oil extraction machine mainly includes four parts: oil extraction/extraction of cbd oil extraction machine, wet meal dissolubilization and drying, evaporation stripping of mixed oil and solvent vapor condensation recovery.
(2) Oil extraction machine cbd oil extraction machine oil extraction machine: the raw material embryo or prepressed cake formed after oil pretreatment is fed into the extractor by the cbd oil extraction machine conveying equipment, and the concentrated mixed meal and wet meal are obtained after solvent extraction.
(3) Cbd oil extraction machine wet meal dissolvation drying: the meal discharged from the cbd oil extraction machine extractor contains 25% ~ 35% solvents. In order to recover these solvents and obtain good quality meal, the cbd oil extraction machine can use heating to steam the dissolvation.
(4) Cbd oil extraction machine mixed oil evaporation stripping: evaporation is the operation process of vaporizing a part of the solvent in the solution by heating, so as to increase the concentration of solute in the solution, even if the volatile solvent is separated from the non-volatile solute. Stripping is steam distillation, which is based on the principle that the mixed oil and water are insoluble, direct steam of a certain pressure is injected into the concentrated mixed oil with a high boiling point, and indirect steam is injected into the jacket of the cbd oil extraction machine for heating, so that the direct steam injected into the mixed oil will not condense. Evaporation and stripping of the mixture generally reduce the solvent content of the oil.
(5) Cbd oil extraction machine solvent vapor condensation recovery: the so-called condensation, that is, at a certain temperature, the gas release of heat into a liquid process. Cooling refers to the process in which the temperature drops but the phase does not change after the hot fluid gives off heat. The condensation recovery of solvent vapor from cbd oil extraction machine reduces the solvent loss in the extraction process.
I hope this article is helpful to your understanding of cbd oil extraction machine. If you need cbd oil extraction machine, please contact us.